Customer Support
Subscribe
.png?ts=1753705835)
.png?ts=1753705897)
Manufacturer:
Warlord Games
28mm (1:64 scale), 30mm (1:58 scale)
Sturdy wooden fences perfect for marking property lines and adding cover to your battlefield, with detailed textures and easy assembly.
Multicolour pre-painted (UV-printed) WW2 Ostfront (East Front) Low Fence (18) - eighteen sections of 1" high wooden barriers no eastern village house would be complete without.
Long Section Dimensions (9 in the set):
• Length: 10cm / 4in
• Width: 1.5cm / 0.6in
• Height: 2.5cm / 1in
Short Section Dimension (9 in the set):
• Length: 5cm / 2in
• Width: 1.5cm / 0.6in
• Height: 2.5cm / 1in
Back-to-back, they form 135cm / 53in of fencing, which is sufficient to fence one house on its own.
These models are delivered as a pack, unassembled and PRE-PAINTED.
Every model is cut from one or more panels of HDF (high-density fibreboard) of 3mm and/or 1.5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue is recommended.
Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens, use colour marker or hobby paint to mask them.
Contents:
18 Fence Sections
‣ 9 Short Sections
‣ 9 Long Sections
Wooden Components
This product is supplied pre-painted. Assembly is required.
Sturdy wooden fences perfect for marking property lines and adding cover to your battlefield, with detailed textures and easy assembly.
Multicolour pre-painted (UV-printed) WW2 Ostfront (East Front) Low Fence (18) - eighteen sections of 1" high wooden barriers no eastern village house would be complete without.
Long Section Dimensions (9 in the set):
• Length: 10cm / 4in
• Width: 1.5cm / 0.6in
• Height: 2.5cm / 1in
Short Section Dimension (9 in the set):
• Length: 5cm / 2in
• Width: 1.5cm / 0.6in
• Height: 2.5cm / 1in
Back-to-back, they form 135cm / 53in of fencing, which is sufficient to fence one house on its own.
These models are delivered as a pack, unassembled and PRE-PAINTED.
Every model is cut from one or more panels of HDF (high-density fibreboard) of 3mm and/or 1.5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue is recommended.
Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens, use colour marker or hobby paint to mask them.
Contents:
18 Fence Sections
‣ 9 Short Sections
‣ 9 Long Sections
Wooden Components
This product is supplied pre-painted. Assembly is required.
You want to be informed when the price of Bolt Action HDF Terrain: WW2 Ostfront Village - Low Fence reaches a certain value? If so, please specify your desired price below.
Related Products
